Monday, June 20, 2016

NodeMCU/ESP8266 + OLED 1.3" 128x64 SPI SH1106, using esp8266-oled-sh1106 library


It's a 1.3" 128x64 OLED of SPI interface, with SH1106 controller. The SH1106 is in general similar to the SSD1306. Main difference is a memory of 132x64 instead of 128x64.

This post show how to connect with NodeMCU and install the library of esp8266-oled-sh1106.

Connection between NodeMCU and the 1.3" 128x64 OLED SPI module with SH1106:
 D5 GPIO14   CLK         - D0 pin OLED display
 D6 GPIO12   MISO (DIN)  - not connected
 D7 GPIO13   MOSI (DOUT) - D1 pin OLED display
 D1 GPIO5    RST         - RST pin OLED display
 D2 GPIO4    DC          - DC pin OLED
 D8 GPIO15   CS / SS     - CS pin OLED display


Download and install the library as shown, and run the example:



Related:
Hello World 1.3 inch IIC/SPI 128x64 OLED x Arduino, using u8glib library
NodeMCU/ESP8266 + OLED 0.96" 128x64 I2C SSD1306 using esp8266-oled-ssd1306 library

1 comment:

  1. I have OLED Display SSD1306 with 6Pin & without Reset pin. So How I can connect it to ESP8266? Plz help

    ReplyDelete